Skip to content
#Robot hardware and key components
  1. 机器人全球资讯 · 微信公众号80

    Agility Robotics lists on Nasdaq, raising about $465 million

    American humanoid robotics company Agility Robotics officially listed on Nasdaq on November 5, 2026, under the ticker AGLT, going public through a merger with Churchill Capital Corp XI. The transaction and related financing are expected to bring in about $465 million in raised funds, including a PIPE financing of about $201 million led by Foxconn.

    Why it matters: Agility's listing makes its orders, deployment duration, and financing structure public, allowing comparison against the real progress of humanoid robot commercialization.

  1. 人形大讲堂 · 微信公众号78

    Leaderdrive's first three quarters revenue up 45%, humanoid reducer orders reach 400,000 units

    Leaderdrive's revenue for the first three quarters of 2026 was 591 million yuan, up 45.30% year on year, with net profit attributable to shareholders of 122 million yuan, up 30.33% year on year; humanoid-related reducer orders rose from about 100,000 units the previous year to 400,000 units. The company's annual harmonic reducer capacity has reached 1 million units, with a year-end target of 1.5 million units, but its gross margin in the first half was 32.26%, down 2.51 percentage points year on year, as new production line debugging and small-batch production of multiple models are weighing on profitability. The article also compares the catch-up pace of domestic manufacturers such as Zhongda Leader, HuanDong Technology, and Laifu Harmonic.

    Why it matters: Across orders, capacity, gross margin, and domestic competition, readers can see the real operating constraints during the ramp-up phase for humanoid reducers.

  1. 雷科技78

    AgiBot Innovation Day releases Worken work-hour metric and Lingqu OS 1.0

    At AgiBot Innovation Day on October 29, AgiBot proposed Worken (effective intelligent work hours), a measurement standard whose formula is number of active robots × autonomous working hours × output efficiency ratio, and released Lingqu OS 1.0, a native operating system for embodied intelligence.

    Why it matters: At Innovation Day, AgiBot proposed the Worken work-hour metric and open-sourced Lingqu OS, giving readers a way to observe new paths for embodied intelligence commercialization and ecosystem openness.

  1. AgiBot75

    AGIBOT Unveils Worken Metrics Framework, AHA3 Hardware Platform, and G2 Max Industrial Robot at 2026 Innovation Day

    At its 2026 Innovation Day, AGIBOT proposed the Worken (effective intelligent working hours) framework, which measures robots' effective output in real environments using three metrics: number of active robots, autonomous working hours, and output efficiency ratio.

    Why it matters: AGIBOT announced its hardware platform, foundation model, operating system, and mass-production model all at once, giving readers a basis to judge its shift from manufacturing scale to measurable output.

  1. 云启资本60

    PHYMI Tech releases first robot Sagi, featuring four-wheeled-legged humanoid configuration and PHYMI BRAIN 1.0

    PHYMI officially released its first robot, Sagi, on October 28. It adopts a "four-wheeled-legged humanoid configuration" combining four wheeled legs with a humanoid upper body, dual arms, and a rear box, targeting scenarios such as office delivery, community errands, and outdoor camping transport.

    Why it matters: The first four-wheeled-legged humanoid robot presents a complete design approach covering configuration trade-offs, a three-layer model, and a data system, allowing comparison with existing bipedal routes to understand the choice of form.

  1. 云启资本60

    Synrise completes Pre-A round exclusively invested by Yunqi, first smart knee S5 in mass production

    Synrise announced the completion of a Pre-A funding round exclusively invested by Yunqi Capital, with proceeds going toward the SynchroMind algorithm foundation, R&D for next-generation products, and global market expansion. Within one year of founding, the company's first product, the Synrise S5 bionic intelligent hydraulic knee, has entered mass production, completed validation deployments in Europe, and received orders exceeding ten million yuan from domestic and overseas markets. A next-generation AI active-power knee is now in R&D, aiming to move from compliant motion to active power output.

    Why it matters: An approach to human augmentation starting from intelligent prosthetics, showing how an algorithm foundation can be reused across products and accumulate real gait data.

  1. 珞石机器人70

    ROKAE Zhuxing H wheeled humanoid robots enter Schaeffler Taicang embodied intelligence digital factory production line

    On October 20, Schaeffler's Taicang embodied intelligence robot digital factory opened, with 5 ROKAE Zhuxing H series wheeled humanoid robots participating in the intelligent assembly line for tasks including bin handling, parts sorting, press-fitting and screw assembly, functional testing, marking and packaging, producing joint module components including actuators for next-generation humanoid robots.

    Why it matters: The original text provides the specific processes and technical configuration of complete machines entering a mass-production line, helping readers judge the current usable boundaries of wheeled humanoid robots in real manufacturing scenarios.

  1. 北京理工大学 · 微信公众号74

    BIT team publishes meter-scale titanium alloy single-crystal additive manufacturing results in Nature

    A team led by Professor Liu Changmeng at Beijing Institute of Technology has pioneered a single-crystal additive manufacturing method based on unsteady pulsed growth in a micro-melt pool, achieving meter-scale titanium alloy single-crystal additive manufacturing for the first time. The results were published in Nature on October 21 in a paper titled "Additive manufacturing ultralong and architected single crystals," with corresponding authors Liu Changmeng, Cui Yinan of Tsinghua University, and Yinmin Morris Wang of the University of California, Los Angeles.

    Why it matters: The paper presents the mechanism and cross-material validation of seed-crystal-free single-crystal additive manufacturing, which readers can use to assess its impact on the barriers to manufacturing single-crystal components.

  2. 人形大讲堂 · 微信公众号78

    Tesla Optimus begins mass production at Fremont line; Musk sets ramp-up target of 20,000 units per week

    Tesla confirmed on its Q3 2026 earnings call that Optimus has rolled off the mass-production line in Fremont; these are the first standard mass-production models, and production started one quarter earlier than planned at the beginning of the year. Musk said the capacity ramp-up will take at least a year, with a final target of 20,000 units per week, corresponding to a production-line hardware design ceiling of one million units per year. The AI capabilities needed for autonomous operation are expected to mature by the end of next year; robots rolling off the line before then will be used internally at Tesla first, with external supply coming later.

    Why it matters: The original ties production start, ramp-up period, and external delivery conditions into a single timeline, helping readers understand the gap between prototypes and stable deliveries.

  1. Agile Robots/思灵机器人68

    Agile Robots and NVIDIA unveil compact humanoid reference platform Agile ONE SN at GTC

    At NVIDIA GTC, Agile Robots and NVIDIA unveiled Agile ONE SN, a compact humanoid reference platform for R&D, built on the NVIDIA Isaac GR00T development platform and integrating a complete workflow spanning demonstration capture, simulation, training, evaluation, deployment, and real-world testing.

    Why it matters: The original article lists the specific configuration of the robot's whole-body degrees of freedom, compute power, and preconfigured software stack, which can be used to assess how this integrated solution for R&D labs connects with the industrial model.

  1. 深圳市机器人协会 · 微信公众号72

    Hui Ling Technology releases 20-DOF dexterous hand eHand-20, priced at 9,999 yuan

    Hui Ling Technology officially released the eHand-20 dexterous hand at the 2026 China International Industry Fair, priced at 9,999 yuan. The product is a direct-drive design with 20 fully active degrees of freedom and 4 joints per finger across five fingers. The entire hand weighs 650 grams and measures 196×87×40 mm. Compared with the previous-generation 6-DOF eHand-6, degrees of freedom are increased 3.3 times, while the unit price remains unchanged at about 500 yuan per degree of freedom.

    Why it matters: The original article uses a unit-price comparison to show that degrees of freedom increased while the price per degree remained unchanged, allowing readers to understand the change in the cost logic of high-DOF dexterous hands.

  1. 云启资本66

    Stardust Intelligence completes new RMB 1 billion funding round at RMB 15 billion valuation

    Stardust Intelligence recently completed a new funding round of RMB 1 billion, reaching a valuation of RMB 15 billion. The round was led by Toushe Donghai (Shenzhen Investment Holdings), with participation from Hongtai Fund, Ninghai Xingtaaihe Fund, and Shanheng Capital, among others, and existing shareholder Xianmu increased its investment. This is its fourth funding round in the past six months; its Series B valuation first exceeded RMB 10 billion in June 2026 and rose to RMB 15 billion three months later.

    Why it matters: It reviews the pace of the company's four funding rounds in six months and details of its full-stack architecture, which can be used to understand the commercialization progress of the rope-driven approach.

  1. CMU Robotics Institute68

    CMU research team develops human-inspired multisensory fingertips for DeltaHands robotic hand

    CMU researchers designed human-hand-inspired fingertips that can be mounted on the DeltaHands flexible robotic hand. They combine strain gauges to measure pinch pressure with a microphone that captures micro-vibrations through a plastic fingernail, enabling the hand to count paper cups, identify materials, and grasp fragile items such as tofu cubes and potato chips. Each fingertip costs less than 100 US dollars, compared with about 800 US dollars to build a similar setup from off-the-shelf products. The work was presented at the 2026 Intelligent Robots and Systems Conference in Pittsburgh.

    Why it matters: The original text provides details on the multimodal tactile design of the human-inspired fingertips and their cost of less than 100 US dollars, helping readers understand how force and vibration sensing support manipulation control.

  2. RobCo61

    RobCo hits $1 billion valuation to become a unicorn, offers employee secondary liquidity

    RobCo's valuation has surpassed $1 billion, doubling within nine months, bringing in new investment through an employee secondary sale, with participation from existing investors including Sequoia and Lightspeed and new investors including Cherry Ventures. Its autonomous industrial robot Alfie will be officially commercially launched on March 4, 2027, at the RobCoN summit in Munich. The company is stepping up its push into the US market, with its CEO having relocated to the US, manufacturing and assembly operations in Austin, Texas, and a lab in San Francisco.

    Why it matters: The company officially announced a valuation above $1 billion and liquidity through an employee secondary sale, offering insight into its capital cadence and US expansion plans.

  1. Boston Dynamics67

    Boston Dynamics unveils dexterous hand for next-gen Atlas robot: 13-DOF four-finger design

    Boston Dynamics has unveiled a dexterous hand for its next-generation Atlas humanoid robot, increasing from GR2's 7 degrees of freedom to 13, using a four-finger design with a 4-DOF opposable thumb, direct drive, and only a single actuator type. The design drops the pinky finger to reduce cost and complexity, is equipped with fingertip and palm pressure tactile sensors, supports pinch grasping, three-finger grasping, and pressing tool triggers, and was optimized for high-fidelity simulation for sim-to-real transfer and reinforcement learning, with preliminary sim-to-real results on dynamic tasks already available.

    Why it matters: The original article details the degrees of freedom, actuation, and simulation design tradeoffs of the next-generation Atlas dexterous hand, letting readers understand how the hand design serves reinforcement learning and real-world work.

  2. Wandercraft68

    Wandercraft Acquires Ekso Bionics to Form Medical Exoskeleton Company

    Wandercraft announced the acquisition of Ekso Bionics from a subsidiary of ChronoScale Holdings; the deal was signed and closed simultaneously, with financial terms undisclosed.

    Why it matters: The source is the acquiring party itself and provides details on the combined product line, clinical coverage, and reimbursement, allowing readers to assess changes in the medical exoskeleton market landscape.

  1. Singularity Hub76

    KAIST quadruped robot RAIBO2 completes marathon without battery swap, ~40 miles per charge

    KAIST's quadruped robot RAIBO2 finished the Persimmon Marathon in Sangju, South Korea, in 4 hours 19 minutes 52 seconds, slightly faster than the human average, without swapping or recharging its battery, and still had 34% charge at the finish; the team described the work in a Nature paper last week.

    Why it matters: The research moves energy saving for legged robots from optimizing single components to holistic design across joints and circuits, offering concrete methods transferable to long-duration outdoor robots.

  1. 松山湖国际机器人研究院 · 微信公众号65

    Benmo Technology Lists on HKEX, Becoming XbotPark's Third Listed Company in Ten Months

    On September 29, XbotPark-incubated company Benmo Technology (stock code 06731.HK) began trading on the Main Board of the Hong Kong Stock Exchange. Described as the first direct-drive stock in Hong Kong, it is the third listed company from the XbotPark system, after CiDi and Woan Robotics.

    Why it matters: The article traces how direct-drive technology moved from a laboratory prototype to annual shipments of 8.5 million units, covering the engineering and scenario-selection process, and serves as a reference case for deep-tech startup paths.

  2. 珞石机器人60

    ROKAE's 10,000th humanoid force-controlled arm rolls off the line and is delivered

    ROKAE's 10,000th humanoid force-controlled arm officially rolled off the line and was delivered on September 29 at its smart manufacturing future factory. The company says it has partnered with more than 80 leading industry partners, and that its force-controlled arms continue to enter real application scenarios. Its humanoid force-controlled product line includes the Xuanji HSA series force-controlled joints with built-in high-precision torque sensors; the Taibai AR series humanoid force-controlled arms, which cover a payload range of 3-20 kg and adopt a humanoid seven-degree-of-freedom and cross-wrist configuration; and the Xuanhe iNex control system, which integrates force control with WBC whole-body motion control.

    Why it matters: The piece explains in fairly specific terms the path of transferring a decade of industrial force-control expertise to humanoid actuation units, as well as the product line composition that supports the 10,000-unit delivery.

  1. Skydio69

    Skydio launches its first fixed-wing drone, F10 Lightrunner, along with MegaDock hangar and two command software platforms

    At Ascend 2026, Skydio launched its first fixed-wing drone, F10 Lightrunner, the accompanying MegaDock hangar, the Controller 2 remote controller, and two software platforms, Asset Command and Security Command.

    Why it matters: The same autonomy engine is being extended to a fixed-wing form factor for the first time, together with a hangar and command software, which lets readers assess its path toward fleet-scale operations and workflow integration.